banner_products_1.jpg banner_products_2.jpg banner_products_3.jpg banner_products_4.jpg banner_products_5.jpg

Side Entry

Side Entry
Previous Next

Side Entry

Item#SideEntry

Pibiviesse side entry ball valves are manufactured in a wide range of diameters and pressure classes.Pibiviesse valves are specified for transmission pipelines, pumping, compression and re-injection units, offshore platforms, onshore terminals, pig traps, measuring stations and any critical applications such as subsea installations, cryogenic  service in LNG plants, high temperature and abrasive services.The valves can be made in the various grades of carbon steel, stainless steel and high alloys thus complying with the most severe service conditions.





Model > E
Size > 1.5” through 64”
Classes > 150 through 2500 and API 3000 to 15000
Temperature > -193 °C to 400 °C

Design & Features
> Trunnion mounted ball
> Triple barrier stem seals
> Anti-Blow Out stem design
> Stem separated from the ball
> Bearing blocks adsorbing the pressure load on the ball
> Single or Double piston effect sealing barrier in both directions
> Built in grease & sealant injection system for emergency stem and seat seal
> Self lubricating PTFE sleeve bearings and thrust washer reducing torque and to extend service life
> Body thickness in accordance with ASME B16.34
> Bolting design to ASME VIII as standard. Different design available on request
> Plastic polymer insert, O-Ring or Metal to metal seat sealing
> Inconel 625 or 316 overlay on sealing areas or on all wetted areas when required
>  Integral stop in the adapter plate for a permanent reference of open and closed position
> Antistatic device
> Double Block and Bleed